All Products

Now the LCD Encoder is available with a sheet metal case! If you are like me, you hate looking up dipswitch settings for your CTCSS tone encoder ... more info

Nakamichi Calibration Board DA09101A. This is our version of the calibration board used on models CR-7, CR-7A,CR-7E cassette deck. To use you press ... more info

The Syntalk Control Head / Microphone is intended to allow operation of the Syntalk converted Syntor transceiver without the use of a dedicated ... more info

Download the Full SynTalk Documentation in .PDF format!

Our Flash memory module replaces the original SyntorX memory module and allows you to easily download channel information into your transceiver from ... more info

Download the Full SynTalk Documentation in .PDF format!

If you are like me, you hate looking up dipswitch settings for tone encoder / decoder boards. The design goal that motivated the ToneLCD was to come ... more info

If you want to add serial interface capability to your TS-440 you will need to install 2 chips inside the radio as outlined in the TS-440 users ... more info

32 pin strip of the .8MM round pins used on the TS-930 Digital Board

This is a replacement serial cable for the TS-930SE board. It comes with the 6 pin modular cable and the 6 pin to DB-9F adapter.